관리자
옵토마린에 오신걸 환영합니다.
[650nm Fiber Optic transmitter & Receiver]
Description
Opto Marine’s 650nm transmitter & receiver is optical module for fiber optic communication links as best solution to malfunction caused by noise and long distance transmission in the industrial field. OMF-12xx is a transmitter built in GaAIAs LED of 650nm red light wavelength. OMF-22xx is a receiver comprised of a photodiode coupled to a transimpedance amplifier(TIA). OMF-12xx transmitter applied to OMF-22xx receivers is attainable up to 100Mbd data rate and 100meter link distance. The transmitters and receivers is housed plastic package made of high strength, heat resistant, chemically resistant, flame retardant plastic, so it is cost effective and high performance. This fiber optic pair is directly compatible with ST, SC, FC, SMA, POF connector and it is completely specified with 1mm Plastic optical fiber.
Features
- LED transmitter with visible red light of 650nm wavelength
- High sensitivity receiver integrated PIN diode and TIA
- Specified with 1mm POF(Plastic Optical Fiber), 200μm HCS
- Data transmission rate : DC ~ 100Mbd, 5Gbps, 10Gbps
- Link up to 100meter distance with 1mm POF
- Connection port : SC/ ST/ FC/ SMA/ POF
OMF-124x Transmitter / OMF-224x Receiver (POF connection type)
Application
- IoT Networking solution for smart home
- Automotive and avionics network system
- Power plant / substation
- Industrial networking : field-bus, Machine control
- Locomotive / Train control transmission system
- Photo-electric switch
- Noise immune communication in audio and video equipment
Pin Map
Specification
Absolute Maximum Ratings (T=25℃ unless otherwise stated)
| Parameter | Symbol | Min. | Max. | Unit | Conditions | |
|---|---|---|---|---|---|---|
| Storage Temperature | Tstg | -40 | 85 | ℃ | ||
| Operating Temperature | Top | -40 | 85 | ℃ | ||
| Soldering Temperature | Tsld | 260 | ℃ | 10 sec. 2mm from case |
||
| TX Reverse Input Voltage | VR | 5 | V | |||
| TX Forward Input Current | DC | IFdc | 50 | mA | ||
| Peak | 150 | mA | ||||
| RX Supply Voltage | VCC | 3.3 | 5 | V | ||
| RX Output Current | IO | 28 | mA | |||
| RX Signal Pin Voltage | VSIG | -0.5 | VCC | V | ||
| Parameter | Symbol | Min. | Max. | Unit | Conditions | |
|---|---|---|---|---|---|---|
| Storage Temperature | Tstg | -40 | 85 | ℃ | ||
| Operating Temperature | Top | -40 | 85 | ℃ | ||
| Soldering Temperature | Tsld | 260 | ℃ | 10 sec. 2mm from case |
||
| TX Reverse Input Voltage | VR | 5 | V | |||
| TX Forward Input Current | DC | IFdc | 50 | mA | ||
| Peak | 150 | mA | ||||
| RX Supply Voltage | VCC | 3.3 | 5 | V | ||
| RX Output Current | IO | 28 | mA | |||
| RX Signal Pin Voltage | VSIG | -0.5 | VCC | V | ||
Peak Output Optical Power (Measured out of 1mtr cable)
| Transmitter | Parameter | Symbol | Min. | Typ. | Max. | Unit | Conditions |
|---|---|---|---|---|---|---|---|
| OMF-12x2 Standard Power |
1mm POF Fiber Cable NA=0.5 |
PT | -9.0 | -7.0 | -5.0 | dBm | IF=20mA, T=25℃ |
| -11.0 | -9.0 | -7.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ | |||
| OMF-12x4 High Power |
1mm POF Fiber Cable NA=0.5 |
PT | -6.0 | -4.0 | -2.0 | dBm | IF=20mA, T=25℃ |
| -8.0 | -6.0 | -4.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ | |||
| OMF-1242 Standard Power |
1mm POF Fiber Cable NA=0.5 |
PT | -10.0 | -8.0 | -6.0 | dBm | IF=20mA, T=25℃ |
| -12.0 | -8.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ | ||||
| OMF-1244 High Power |
1mm POF Fiber Cable NA=0.5 |
PT | -6.0 | -4.0 | -2.0 | dBm | IF=20mA, T=25℃ |
| -8.0 | -4.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ |
| Transmitter | Parameter | Symbol | Min. | Typ. | Max. | Unit | Conditions |
|---|---|---|---|---|---|---|---|
| OMF-12x2 Standard Power |
1mm POF Fiber Cable NA=0.5 |
PT | -9.0 | -7.0 | -5.0 | dBm | IF=20mA, T=25℃ |
| -11.0 | -9.0 | -7.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ | |||
| OMF-12x4 High Power |
1mm POF Fiber Cable NA=0.5 |
PT | -6.0 | -4.0 | -2.0 | dBm | IF=20mA, T=25℃ |
| -8.0 | -6.0 | -4.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ | |||
| OMF-1242 Standard Power |
1mm POF Fiber Cable NA=0.5 |
PT | -10.0 | -8.0 | -6.0 | dBm | IF=20mA, T=25℃ |
| -12.0 | -8.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ | ||||
| OMF-1244 High Power |
1mm POF Fiber Cable NA=0.5 |
PT | -6.0 | -4.0 | -2.0 | dBm | IF=20mA, T=25℃ |
| -8.0 | -4.0 | dBm | IF=20mA, T=-40℃ ~ +85℃ |
Electrical and Optical Characteristics (T=-40℃ ~ +85℃, typical values are at 25℃, unless otherwise stated)
| Transmitter (OMF-12xx/OMF-124xx) | Symbol | Min. | Typ. | Max. | Unit | Conditions |
|---|---|---|---|---|---|---|
| Forward Voltage | VF | 1.8 | 2.1 | 2.5 | V | IF=20mA |
| Reverse Input Voltage | VBR | - | 5 | - | V | IF=20mA |
| Peak Emission Wavelength | λP | 640 | 657 | 650 | nm | |
| Rise and Fall Times (10% ~ 90%) | tr, tf | 3/3 | ns | IF=20mA |
| Receiver (OMF-22xx) | Symbol | Min. | Typ. | Max. | Unit | Conditions |
|---|---|---|---|---|---|---|
| Sensitivity | P | -21 | -18 | -15 | dBm | |
| Series Resistance | RS | 1.4 | 1.8 | 2.6 | V | |
| Optical Input Overload | POVERLOAD | 1 | 3 | dBm | ||
| Supply Current | ICC | 22 | 28 | 36 | mA | no loads |
| Bandwidth | BW | 165 | MHz | -3dB Electrical | ||
| Rise and Fall Times (10% ~ 90%) | tr,tf | 5/5 | ns |
| Receiver (OMF-224x) | Symbol | Min. | Typ. | Max. | Unit | Conditions |
|---|---|---|---|---|---|---|
| Peak POF Sensitivity Minimum input |
PRL, min | -18.0 | -16.0 | dBm | T=25℃ 650nm, 1mm POF | |
| -15.0 | T=-40℃ ~ +85℃ 650nm, 1mm POF | |||||
| Peak POF Overdrive Maximum input |
PRL, max | +1.0 | +5.0 | dBm | T=25℃ 650nm, 1mm POF | |
| -1.0 | T=-40℃ ~ +85℃ 650nm, 1mm POF | |||||
| Peak HCS Sensitivity Minimum Input |
PRL, min | -21.0 | -20.0 | dBm | T=25℃ 650nm, 200um HCS | |
| -19.0 | T=-40℃ ~ +85℃ 650nm, 200um HCS | |||||
| Peak HCS Overdrive Maximum Input |
PRL, max | -1.0 | +3.0 | dBm | T=25℃ 650nm, 200um HCS | |
| -3.0 | T=-40℃ ~ +85℃ 650nm, 200um HCS | |||||
| Spectral Width | FWHM | 22 | nm | |||
| Supply Current | IEE | 22 | 28 | 36 | mA | no loads |
| Bandwidth | BW | 165 | MHz | -3dB Electrical | ||
| Rise and Fall Times (10% ~ 90%) | tr, tf | 5/5 | ns | VR = 10V RL = 50Ω |
||
| Transmitter (OMF-12xx/OMF-124xx) |
Symbol | Min. | Typ. |
|---|---|---|---|
| Max. | Unit | Conditions | |
| Forward voltage | VF | 1.8 | 2.1 |
| 2.5 | V | IF=20mA | |
| Reverse input voltage | VBR | - | 5 |
| - | V | IF=20mA | |
| Peak emission wavelength | λP | 640 | 657 |
| 650 | nm | ||
| Rise and Fall Times (10% ~ 90%) | tr tf |
3/3 | |
| ns | IF=20mA |
| Receiver (OMF-22xx) | Symbol | Min. | Typ. |
|---|---|---|---|
| Max. | Unit | Conditions | |
| Sensitivity | P | -21 | -18 |
| -15 | dBm | ||
| Series Resistances | RS | 1.4 | 1.8 |
| 2.6 | V | ||
| Optical input overload | POVERLOAD | 1 | 3 |
| dBm | |||
| Supply current | ICC | 22 | 28 |
| 36 | mA | No loads | |
| Bandwidth | BW | 165 | |
| MHz | -3dB Electrical | ||
| Rise and Fall Times (10% ~ 90%) | tr tf |
5/5 | |
| ns |
| Receiver (OMF-224x) | Symbol | Min. | Typ. | Max. | Unit | Conditions |
|---|---|---|---|---|---|---|
| Peak POF Sensitivity Minimum input |
PRL, min | -18.0 | -16.0 | dBm | T=25℃ 650nm, 1mm POF | |
| -15.0 | T=-40℃ ~ +85℃ 650nm, 1mm POF | |||||
| Peak POF Overdrive Maximum input |
PRL, max | +1.0 | +5.0 | dBm | T=25℃ 650nm, 1mm POF | |
| -1.0 | T=-40℃ ~ +85℃ 650nm, 1mm POF | |||||
| Peak HCS Sensitivity Minimum Input |
PRL, min | -21.0 | -20.0 | dBm | T=25℃ 650nm, 200um HCS | |
| -19.0 | T=-40℃ ~ +85℃ 650nm, 200um HCS | |||||
| Peak HCS Overdrive Maximum Input |
PRL, max | -1.0 | +3.0 | dBm | T=25℃ 650nm, 200um HCS | |
| -3.0 | T=-40℃ ~ +85℃ 650nm, 200um HCS | |||||
| Spectral Width | FWHM | 22 | nm | |||
| Supply Current | IEE | 22 | 28 | 36 | mA | no loads |
| Bandwidth | BW | 165 | MHz | -3dB Electrical | ||
| Rise and Fall Times (10% ~ 90%) | tr, tf | 5/5 | ns | VR = 10V RL = 50Ω |
||
Ordering Info
